OzMask Professional Specification
- Infrared Led Light Mask goes up to 860nm
- built in goggles to protect your eyes
- Full charging time within 3.5 H
- 280 LEDs Light
- 7 diffrent lights
How to use
- Apply the appropriate lotion to your skin.
Connect the cable of LED Mask to controller port.
- Note: Before using the unit, make sure that the controller is sufficiently charged.
- Turn on by pressing the Power(Start/Pause) button.
- Wear the LED Mask, Make sure that the eye shield completely covers your eyes
- for preventing LED lights from entering your eyes. Only when properly worn, LED Treatment is started.
- Relax with the Derma LED Mask in place for the 10 minutes. During the treatment time,
- Voice guide is provided for 3, 6, 10 minutes to notice the remaining time. As shown below, the LED lights up in red corresponding to the remaining time.
- Press M Button to choose Led colors, total 7 colors, each color mode is always with IR, the indicator will be switched accordingly.
- Press Mode Button for 10 seconds to change Language English
- After treatment, please use a soft, dry cloth to clean and make it dry, then store it well.
- Note: Recommend using the product once a day. Using more than twice a day may cause burning sensation on skin.